How to Pebbl
1
Twist the cap open
Twist to open the cap of your Pebbl to reveal the 'S'-shaped groove for the wire. We recommend gripping the cap at the flat sections near the two outer holes. Warning: Do not press the button while the cap is off or if a wire is not installed.
2
Twist the middle section anit-clockwise
Twist the 'S'-shaped groove anticlockwise slowly until you feel a ‘click’. 9 clicks for Pebbl 1 mini and 16 clicks for Pebbl 2. You may wish to wind up for fewer clicks to create slower retraction (better for looser or braided cables), or more clicks to make faster retraction (better for stiffer rubber cables).
3
Insert the middle of your cable in the middle of s grove
Fold your charging cable in half to locate the centre. Insert this centre into the middle of the 'S'-shaped groove. Make sure your charging cable is fully seated inside the groove. (Refer to the video guide if needed.) Note: If you accidentally press the button at this stage, proceed to Step 4. Do not attempt to remove the cable with the cap off.
4
Close the cap
Close the cap by aligning the left eye of the Pebbl with the mouth. Close and twist to lock the cap in place; you should feel it click. (Refer to video guide for visual reference.)
5
Press the button and Pebbl
Hold your cable and press the button on the side of your Pebbl. You should feel the cable being pulled in.
How to Pebbl Set Up Guides
Dentro de tu caja Pebbl encontrarás una tarjeta circular con un código QR.
Escanéalo — eso es lo que te trajo aquí.
A continuación encontrarás la guía de configuración para tu modelo específico de Pebbl. Si todavía estás esperando que llegue el tuyo, puedes explorar cómo funciona todo. Puedes ver los tutoriales, así como un video con los problemas más comunes y cómo resolverlos — solo haz clic en la imagen de abajo para comenzar.
Pebbl 1 Mini setup tutorial
Pebbl 2 set up tutorial
Common problems and solutions - troubleshooting video
If you’re facing any issues with your Pebbl, don’t worry! Watch this video as we go through common problems and simple fixes.
Frequently Asked Questions
We currently ship to the UK, the US, and a select number of countries across Europe. Shipping costs vary depending on your location and will be calculated at checkout.
Pebbl 1 Mini works with most standard charging cables that are 1 metre in length and approximately 3 mm thick. For the best fit and performance, we recommend using official Apple cables or cables with similar dimensions.
Pebbl 2 is designed for most 2-metre charging cables and Apple’s braided MacBook chargers. It supports thicker, heavier-duty cables compared to the Pebbl 1 Mini. If your cable is similar in size to Apple’s 2-metre MacBook braided chargers, it should fit comfortably.
To keep your Pebbl safe and working properly, please avoid the following:
- Do not press the side button when no cable is inside.
Triggering the mechanism without a cable—or while the spring is under tension—can cause the internal spring to snap and may be unsafe. - Do not twist the internal mechanisms clockwise when setting up your Pebbl.
The organiser is designed to lock in only one direction. Turning it the wrong way can break the internal structure. - Do not extend the cable without the cap securely attached.
Using the mechanism without the cap in place puts stress on the organiser and can cause it to break. Always ensure the cap is on before extending your cable.
Following these steps helps protect the internal components and ensures your Pebbl lasts as long as possible.
If you have any issues please contact us at hello@pebblinnovations.com
No, when used properly, Pebbl does not cause damage to your cables. For best results, we recommend watching our setup video here to ensure you’re using the organiser correctly.
If you’re experiencing issues, please check our troubleshooting video here And if you still need help, you can reach us anytime at hello@pebblinnovations.com.
Pebbl uses small internal magnets, but don’t worry, they do not interfere with your phone or other devices.