Zespół
Arik Shukhman — CEO & Inżynier Produktu
Cześć, jestem Arik, założyciel, CEO oraz inżynier stojący za Pebble One. Studiowałem inżynierię na University of Bristol i stworzyłem Pebbl Innovations, ponieważ naprawdę miałem dość codziennego wyciągania splątanych kabli z torby. Nie mogłem znaleźć automatycznego zwijacza do moich własnych kabli, więc postanowiłem zbudować go samodzielnie.
Od tego czasu drukuję produkt w technologii 3D i udoskonalam go na miejscu, dopracowując każdy mechanizm i każdy detal projektu, aby był jak najbardziej płynny w działaniu, kompaktowy i satysfakcjonujący w użyciu. Odpowiadam za rozwój produktu i dbam o to, aby każdy Pebble był trwały i solidnie wykonany.
Poza Pebbl Innovations najczęściej można mnie znaleźć przy kawie (koniecznie z mlekiem owsianym), na treningu kalisteniki albo słuchającego podcastów — zawsze w ruchu, zawsze tworząc.
Holly Brown — Współzałożycielka, Brand & Marketing Lead
Cześć, jestem Holly! Ukończyłam University of Bristol z tytułem BSc w dziedzinie Childhood Studies, a teraz tworzę strony internetowe, prowadzę nasz marketing i współzałożyłam Pebbl Innovations.
Jestem osobą stojącą za marką Pebbl Innovations — od projektowania strony internetowej i treści w mediach społecznościowych po tworzenie wewnętrznych systemów i pracę za kulisami. Kiedy nie dopracowuję układów stron ani nie edytuję treści, można mnie znaleźć na siłowni, w kawiarni z flat white w ręku albo pochłoniętą podcastem.
Pebbl Innovations to nie tylko produkty — to budowanie społeczności. Nieustannie rozwijamy nasze produkty wspólnie z Wami, aby były jak najbardziej wygodne, estetyczne i funkcjonalne, dopasowane do Waszych potrzeb. Nie studiowałam marketingu ani biznesu, ale zbudowaliśmy to wszystko od podstaw, ponieważ w to wierzyliśmy — i mam nadzieję, że to widać.
Frequently Asked Questions
We currently ship to the UK, the US, and a select number of countries across Europe. Shipping costs vary depending on your location and will be calculated at checkout.
Pebbl 1 Mini works with most standard charging cables that are 1 metre in length and approximately 3 mm thick. For the best fit and performance, we recommend using official Apple cables or cables with similar dimensions.
Pebbl 2 is designed for most 2-metre charging cables and Apple’s braided MacBook chargers. It supports thicker, heavier-duty cables compared to the Pebbl 1 Mini. If your cable is similar in size to Apple’s 2-metre MacBook braided chargers, it should fit comfortably.
To keep your Pebbl safe and working properly, please avoid the following:
- Do not press the side button when no cable is inside.
Triggering the mechanism without a cable—or while the spring is under tension—can cause the internal spring to snap and may be unsafe. - Do not twist the internal mechanisms clockwise when setting up your Pebbl.
The organiser is designed to lock in only one direction. Turning it the wrong way can break the internal structure. - Do not extend the cable without the cap securely attached.
Using the mechanism without the cap in place puts stress on the organiser and can cause it to break. Always ensure the cap is on before extending your cable.
Following these steps helps protect the internal components and ensures your Pebbl lasts as long as possible.
If you have any issues please contact us at hello@pebblinnovations.com
No, when used properly, Pebbl does not cause damage to your cables. For best results, we recommend watching our setup video here to ensure you’re using the organiser correctly.
If you’re experiencing issues, please check our troubleshooting video here And if you still need help, you can reach us anytime at hello@pebblinnovations.com.
Pebbl uses small internal magnets, but don’t worry, they do not interfere with your phone or other devices.