Word een Pebbler

Je kabels georganiseerd met één klik.

Horloge installatiegidsen

Hoe Pebbl te gebruiken

1

Draai de dop open

Draai om de dop van je Pebbl te openen en de S-vormige groef voor de kabel bloot te leggen. We raden aan om de dop vast te houden aan de platte delen bij de twee buitenste gaten. Waarschuwing: Druk niet op de knop terwijl de dop eraf is of wanneer er geen kabel is geïnstalleerd.

2

Draai het middelste gedeelte tegen de klok in

Draai de S-vormige groef langzaam tegen de klok in totdat je een klik voelt. 9 klikken voor de Pebbl 1 Mini en 16 klikken voor de Pebbl 2. Minder klikken zorgen voor een langzamere terugtrekking (voor soepelere of gevlochten kabels) en meer klikken voor een snellere terugtrekking (voor stijvere rubberen kabels).

3

Plaats het midden van de kabel in de S-groef

Vouw je oplaadkabel dubbel om het midden te vinden. Steek dit midden in het centrale deel van de S-vormige groef. Zorg ervoor dat je kabel volledig in de groef zit. (Raadpleeg indien nodig de videogids. Opmerking: Als je per ongeluk op de knop drukt in deze fase, ga dan door naar Stap 4. Probeer de kabel niet te verwijderen terwijl de dop eraf is.

4

Sluit de dop

Sluit de dop door het linkeroog van de Pebbl uit te lijnen met de mond. Sluit en draai om de dop vast te zetten; je zou een klik moeten voelen. (Zie de videogids voor visuele referentie.)

5

Druk op de knop

Houd je kabel vast en druk op de knop aan de zijkant van je Pebbl. Je zou moeten voelen dat de kabel wordt ingetrokken.

How to Pebbl Set Up Guides

In je Pebbl-doos vind je een ronde kaart met een QR-code.

Scan deze — zo ben je hier terechtgekomen.

Hieronder vind je de installatiehandleiding voor jouw specifieke Pebbl-model. Als je nog wacht tot de jouwe arriveert, kun je alvast ontdekken hoe alles werkt. Je kunt de tutorials bekijken, evenals een video met de meest voorkomende problemen en hoe je deze kunt oplossen — klik gewoon op de onderstaande afbeelding om te beginnen.

Pebbl 1 Mini installatiehandleiding

Pebbl 2 installatiehandleiding

Veelvoorkomende problemen en oplossingen – probleemoplossingsvideo

If you’re facing any issues with your Pebbl, don’t worry! Watch this video as we go through common problems and simple fixes.

Frequently Asked Questions

We currently ship to the UK, the US, and a select number of countries across Europe. Shipping costs vary depending on your location and will be calculated at checkout.

Pebbl 1 Mini works with most standard charging cables that are 1 metre in length and approximately 3 mm thick. For the best fit and performance, we recommend using official Apple cables or cables with similar dimensions.

Pebbl 2 is designed for most 2-metre charging cables and Apple’s braided MacBook chargers. It supports thicker, heavier-duty cables compared to the Pebbl 1 Mini. If your cable is similar in size to Apple’s 2-metre MacBook braided chargers, it should fit comfortably.

To keep your Pebbl safe and working properly, please avoid the following:

  • Do not press the side button when no cable is inside.
    Triggering the mechanism without a cable—or while the spring is under tension—can cause the internal spring to snap and may be unsafe.
  • Do not twist the internal mechanisms clockwise when setting up your Pebbl.
    The organiser is designed to lock in only one direction. Turning it the wrong way can break the internal structure.
  • Do not extend the cable without the cap securely attached.
    Using the mechanism without the cap in place puts stress on the organiser and can cause it to break. Always ensure the cap is on before extending your cable.

Following these steps helps protect the internal components and ensures your Pebbl lasts as long as possible.

If you have any issues please contact us at hello@pebblinnovations.com

No, when used properly, Pebbl does not cause damage to your cables. For best results, we recommend watching our setup video here to ensure you’re using the organiser correctly.

If you’re experiencing issues, please check our troubleshooting video here And if you still need help, you can reach us anytime at hello@pebblinnovations.com.

Pebbl uses small internal magnets, but don’t worry, they do not interfere with your phone or other devices.