Tiimi
Arik Shukhman — Toimitusjohtaja & Tuoteinsinööri
Hei, olen Arik, perustaja, toimitusjohtaja ja Pebble Onen taustalla oleva insinööri. Opiskelin insinööritieteitä University of Bristolissa ja perustin Pebbl Innovationsin, koska olin aidosti kyllästynyt kaivamaan sotkeutuneita kaapeleita laukustani joka päivä. En löytänyt automaattista kaapelikelainta omille olemassa oleville kaapeleilleni, joten päätin rakentaa sellaisen itse.
Siitä lähtien olen 3D-tulostanut ja kehittänyt tuotetta itse, hioen jokaista mekanismia ja suunnitteluyksityiskohtaa, jotta siitä tulisi mahdollisimman sulava, kompakti ja miellyttävä käyttää. Vastaan tuotekehityksestä ja varmistan, että jokainen Pebble on rakennettu kestämään.
Pebbl Innovationsin ulkopuolella minut löytää todennäköisesti kahvikupin äärestä (kauramaidolla, tietenkin), calisthenics-harjoituksesta tai kuuntelemasta podcasteja — aina liikkeessä, aina luomassa uutta.
Holly Brown — Perustajajäsen, Brändi & Markkinointivastaava
Hei, olen Holly! Valmistuin University of Bristolista kandidaatiksi (BSc) Childhood Studies -alalta, ja nykyään rakennan verkkosivustoja, vastaan markkinoinnistamme ja olen yksi Pebbl Innovationsin perustajista.
Olen Pebbl Innovations -brändin takana — suunnittelen verkkosivut ja some-sisällöt, luon sisäisiä järjestelmiä ja työskentelen kulissien takana. Kun en hio ulkoasuja tai muokkaa sisältöä, minut löytää kuntosalilta, kahvilasta flat whiten kanssa tai uppoutuneena podcastiin.
Pebbl Innovations ei ole vain tuotteita varten — kyse on yhteisön rakentamisesta. Kehitämme tuotteitamme jatkuvasti yhdessä teidän kanssanne, jotta niistä tulisi mahdollisimman käteviä, esteettisiä ja hyödyllisiä tarpeisiinne. En opiskellut markkinointia tai liiketoimintaa, mutta rakensimme kaiken tämän alusta asti, koska uskoimme siihen — ja toivon, että se näkyy.
Frequently Asked Questions
We currently ship to the UK, the US, and a select number of countries across Europe. Shipping costs vary depending on your location and will be calculated at checkout.
Pebbl 1 Mini works with most standard charging cables that are 1 metre in length and approximately 3 mm thick. For the best fit and performance, we recommend using official Apple cables or cables with similar dimensions.
Pebbl 2 is designed for most 2-metre charging cables and Apple’s braided MacBook chargers. It supports thicker, heavier-duty cables compared to the Pebbl 1 Mini. If your cable is similar in size to Apple’s 2-metre MacBook braided chargers, it should fit comfortably.
To keep your Pebbl safe and working properly, please avoid the following:
- Do not press the side button when no cable is inside.
Triggering the mechanism without a cable—or while the spring is under tension—can cause the internal spring to snap and may be unsafe. - Do not twist the internal mechanisms clockwise when setting up your Pebbl.
The organiser is designed to lock in only one direction. Turning it the wrong way can break the internal structure. - Do not extend the cable without the cap securely attached.
Using the mechanism without the cap in place puts stress on the organiser and can cause it to break. Always ensure the cap is on before extending your cable.
Following these steps helps protect the internal components and ensures your Pebbl lasts as long as possible.
If you have any issues please contact us at hello@pebblinnovations.com
No, when used properly, Pebbl does not cause damage to your cables. For best results, we recommend watching our setup video here to ensure you’re using the organiser correctly.
If you’re experiencing issues, please check our troubleshooting video here And if you still need help, you can reach us anytime at hello@pebblinnovations.com.
Pebbl uses small internal magnets, but don’t worry, they do not interfere with your phone or other devices.