3D Printing Our Pebbls

Every Pebbl is 3D printed.
Layer by layer.
Slowly and deliberately.

This process gives us control, reduces waste, and lets us focus on the details that matter.

The fine lines you see aren’t flaws.
They’re part of the process.
Each one marks a layer added.

Colour isn’t just visual.
It changes how Pebbl feels, smooth, matte, lightly textured.

Pebbl is lightweight but strong, thanks to smart internal structures that add strength without bulk.

Each one is printed individually.
Small variations happen.
That’s intentional.

Printed in 100% PLA, a plant-based plastic from renewable resources.

Thoughtfully made.
Designed for everyday use.
Just a little bit different.

Snap. Stack. Go.

 Shop Now

Frequently Asked Questions

We currently ship to the UK, the US, and a select number of countries across Europe. Shipping costs vary depending on your location and will be calculated at checkout.

Pebbl 1 Mini works with most standard charging cables that are 1 metre in length and approximately 3 mm thick. For the best fit and performance, we recommend using official Apple cables or cables with similar dimensions.

Pebbl 2 is designed for most 2-metre charging cables and Apple’s braided MacBook chargers. It supports thicker, heavier-duty cables compared to the Pebbl 1 Mini. If your cable is similar in size to Apple’s 2-metre MacBook braided chargers, it should fit comfortably.

To keep your Pebbl safe and working properly, please avoid the following:

  • Do not press the side button when no cable is inside.
    Triggering the mechanism without a cable—or while the spring is under tension—can cause the internal spring to snap and may be unsafe.
  • Do not twist the internal mechanisms clockwise when setting up your Pebbl.
    The organiser is designed to lock in only one direction. Turning it the wrong way can break the internal structure.
  • Do not extend the cable without the cap securely attached.
    Using the mechanism without the cap in place puts stress on the organiser and can cause it to break. Always ensure the cap is on before extending your cable.

Following these steps helps protect the internal components and ensures your Pebbl lasts as long as possible.

If you have any issues please contact us at hello@pebblinnovations.com

No, when used properly, Pebbl does not cause damage to your cables. For best results, we recommend watching our setup video here to ensure you’re using the organiser correctly.

If you’re experiencing issues, please check our troubleshooting video here And if you still need help, you can reach us anytime at hello@pebblinnovations.com.

Pebbl uses small internal magnets, but don’t worry, they do not interfere with your phone or other devices.